This data set represents the model results plotted in the figures in Bett et al. (2024), produced using the MITgcm/WAVI ice/ocean coupled model. The model domain is the Amundsen Sea sector, where the simulations start in approximately the year 2015 and run for 180 years. Simulations are forced using idealised ocean boundary conditions which represent cold and warm conditions, along with a third extreme case where no ice shelf melting is applied. These simulations were produced in order to examine the ice/ocean processes that occur during future evolution of the region. For full descriptions of the results plotted in each figure see Bett et al. (2024). Funding was provided by NERC Grant NE/S010475/1, ITGC THWAITES MELT (NE/S006656/1), ITGC THWAITES PROPHET (NE/S006796/1) and the European Union''s Horizon 2020 grant PROTECT (869304).

This dataset provides model output for 20th and 21st-century ice-ocean simulations in the Amundsen Sea. The simulations are performed with the MITgcm model at 1/10 degree resolution, including components for the ocean, sea ice, and ice shelf thermodynamics. Atmospheric forcing is provided by the CESM1 climate model for the historical period (1920-2005) and four future scenarios (2006-2100), using 5-10 ensemble members each. The open ocean boundaries are forced by either the corresponding CESM1 simulation or a present-day climatology. The simulations were completed in 2022 by Kaitlin Naughten at the British Antarctic Survey (Polar Oceans team). UKRI Fund for International Collaboration NE/S011994/1

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1532A on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.

This is the output from high-resolution model simulations of ocean conditions and melting beneath the floating part of Thwaites Glacier. The model is designed to study how these conditions change as the geometry of Thwaites Glacier evolved from 2011-2022. There is one simulation using the geometry from each year during this period, derived from satellite observations. The simulations are repeated for different ocean model forcing conditions, as described in the associated paper. PH was supported by the NERC/NSF Thwaites-MELT project (NE/S006656/1). ITGC contribution number 099. *******PLEASE BE ADVISED TO USE VERSION 2.0 DATA******* (Version 1 had the seabed bathymetry and ice shelf topography files incorrectly oriented.)

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1533A on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.

This data set represents the model results plotted in the figures in Bett et al. (2020). Data portrays Amundsen Sea freshwater fluxes and freshwater passive tracer results, along with the results on the effect of grounded icebergs and iceberg melt on sea ice and oceanic heat content. These results are derived from Amundsen Sea regional model simulations over the period 1979-2018, with the first 10 years regarded as model spin up. For full descriptions of the results plotted in each figure see Bett et al. (2020).

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1532C on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1532G on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1532B on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.

This data set presents contents of the clay minerals smectite, illite, chlorite and kaolinite analysed on the clay fraction (less than 2 micrometers) of Pleistocene-Holocene drift sediments recovered at Hole U1533B on the Amundsen Sea continental rise during IODP Exp379 with RV JOIDES Resolution in Jan-Mar 2019. The clay mineral contents are given in percentages (%) both versus expedition number, site number, hole ID, core number, drill core type (H: advanced piston corer system, X: extended core barrel system; R: rotary core barrel system), section number (sect), section half (W: work; A: archive) and depth of the top and bottom of the sample within a section or core catcher (CC) in centimetres (cm) and versus depth below seafloor (CSF-A) in metres (m). The d-values (in Angstrom) and integral breadths (IB, delta 2theta) of the clay minerals smectite and illite as well as the ratios between the areas of the 5 Angstrom and 10 Angstrom peaks of illite are also given. The clay mineral data were generated and analysed by Dr Claus-Dieter Hillenbrand (British Antarctic Survey, Cambridge, United Kingdom) and Prof Werner Ehrmann (Institute of Geophysics and Geology, University of Leipzig, Germany). Users of this dataset should cite the dataset DOI and acknowledge both the data generators (C.-D. Hillenbrand and W. Ehrmann) and the International Ocean Discovery Program (IODP). The work was funded by NERC UK-IODP Moratorium Award NE/T010975/1.